Connection mode and process of alumina ceramic pipe
      As far as alumina ceramic pipe is concerned, I think there are many ways to connect it. But here, people should pay special attention to it. As for alumina ceramic pipe, people should choose different ways to connect it according to its own main conditions. At that time, it should also be convenient and dominant. Here, people will introduce the simple process of ceramic pipe connection in detail.
      As for the alumina ceramic pipe, the first thing people should do is to break the pipe. The pipe fittings must be disconnected first according to the length of the pipe. Then people should  pay special attention when breaking the pipe. They should not use too much effort, otherwise it will cause the porcelain liquid rising pipe to lose its roundness. Next, remove the burr. When the pipe fittings are disconnected, they must remove the burr and clean it, or they will scratch it Damage the sealing ring.
Next, about alumina ceramic tubes, what people have to do is to draw lines and marks. In order to make the porcelain lifting pipe be able to completely add the pipe socket connection, at that time, it is necessary to mark the length of the added pipe at the end of the pipe; then the sealing ring should be properly installed in the type tank body of the porcelain lifting pipe. In order to solve this problem, people have to add pipes to the mouth and wait for riveting.
Next, for the connection of alumina ceramic pipes, what people have to do is to rivet and check. At the time of riveting and pressing, pay special attention to the protruding position of the pipe. If it is placed in the concave groove of the grinding tool, it must be held upright for the jaw and the pipe center line. After the above process, people should pay special attention to the application of special gauge to carry out a check on the specifications of people's riveting.
      Left and right words is about alumina ceramic tube, its connection of all 1 process. What we have to say here, I think it was already said at the beginning. As for the connection of alumina ceramic pipes, it is not the only fixed method. Therefore, people should connect people's ceramic pipes according to their own actual conditions and regulations.